Cleans engines in 5 minutes. Frees up sludge associated with slow city driving. IMPORTANT. MotorMedic Motor Flush is notrecommended for Turbo Charged engines, when the Turbo Charger is lubricated by the engine oil. For those applications use　MOTORMEDIC Synthetic Motor Flush for Turbo Charged Gas and Diesel Engines (MFD1).

5分鐘快速清潔引擎油路，速效去除引擎油路堵塞油泥。重點，該商品不適用渦輪增壓引擎及柴油引擎，如要清洗這類引擎油路，請選擇購買 MotorMedic 渦輪引擎&重柴油引擎-合成清洗劑(MFD1)

DIRECTIONS:

Check to make certain oil in crankcase is up to safe level.

Add MOTORMEDIC Motor Flush to cold engine before changing oil and filter. Idle engine at normal speed for 5 minutes. DO NOT DRIVE THE VEHICLE. MOTORMEDIC Motor Flush will circulate throughout the entire lubricating system of your engine dissolving sludge, gums and varnishes from engine and oil pan. It also frees sticking valves and rings.

Drain crankcase and remove oil filter. Replace drain plug and install new oil filter. NOTE: On engines with 75,000 miles or excessive deposits, remove and clean the oil pan to minimize the risk of engine damage.

Refill crankcase with oil. NOTE: Extremely dirty engines may require repeat treatment. Follow directions 1 to 4.

使用方式:

檢查引擎油箱內的機油液面有足夠的前置量。

加入本商品到引擎油箱內，啟動引擎但不可踩踏油門，使引擎怠速運轉5分鐘，這段時間藥劑會深入引擎油路內部，快速去除清潔汙垢及油泥，確實暢通潤滑管道。

洩露掉全部的機油，並建議行駛高里程的車輛一定要更換機油濾清器，以避免機油濾清器被沖洗下來的髒汙堵塞。

髒污特別嚴重的車輛，可重複上面步驟直到油路確實清潔。